Hebei BANENS Medical instrument co., LTD

Banens cast is moisture resistant, lightweight, strong, porous, X-ray translucent, durable and removed easily
Banens cast has excellent mold ability, flexibility, lamination for patient comfort, easy and simple to use

Application instructions

1. Slip the two layers of banens safe pad on the affected body part

2. Gloves must be worn

3. Open only one roll of banens cast at a time

4. Immerse the roll in the water in a temperature of 20~24 degrees for

3-5 seconds and squeeze 3-4 times in the water for the complete water penetration into the body of the roll

This process will help strengthen adhesion and make it easy to come off the roll

* Do not put it in the water for too long

5. Wrap spirally, taking care to avoid excessive tightness

* Finish wrapping it up within 1 minute and 10 seconds after the pouch is open

6. Smooth and rub the surface to achieve good contact between layers in 3-5 minutes after immersion in the water, tomato cast is sufficiently cured for further molding

Removal: banens cast can be removed with a traditional cast saw, care should be taken to avoid injury to the patient when a small amount of under padding has been used

Product information

BGW-002: 2" x 4yds (5.0cm x 3.6m), 10 rolls

BGW-003: 3" x 4yds (7.5cm x 3.6m), 10 rolls

BGW-004: 4" x 4yds (10.0cm x 3.6m), 10 rolls

BGW-005: 5" x 4yds (12.5cm x 3.6m), 10 rolls

BGW-006: 6" x 4yds (15cm x 3.6m), 10 rolls

Storage:
Store unopened products in a cool and dry atmosphere at room temperature 15 to 30°C
Higher or lower temperature may affect the shelf life of three years from the manufacturing date, care should be taken to avoid punching and damaging the pouch, which will cause the premature hardening of the product

Precaution:
1. Each roll should be gently squeezed prior to opening to check suitability for application, unopened roll should be soft and flexible, do not use the roll that feels hard
2. Polyurethane resin can adhere firmly to unprotected skin, hair and clothing, which may cause a mild irritation, thus, always wear protective gloves to apply and use alcohol or acetone before to remove the polymer
3. An uncomfortable increase of heat can be caused during hardening by excessive layering of tape or immersing in water at temperature above 27°C
4. All application should be followed instructions and directions of doctor or qualified medical professional
5. Products should be stored out of reach of children